Technical specifications
Monitoring Functions:
Self-supervision of relay and R2R communication
Trip circuit supervision (74TC)
Measured-value supervision
Oscillographic fault recording
Event/fault logging
Switching statistics
Front Design:
User-friendly operation interface
PC front port for DIGSI 4 configuration
Function keys and 14 LEDs for local alarm indication
Communication Interfaces:
2 serial R2R protection data interfaces (ring/chain topology)
Front PC interface
System interface for control system connection via:
IEC 61850 Ethernet
IEC 60870-5-103
PROFIBUS-FMS / DP
DNP 3.0
Rear-side service/modem interface
Time synchronization via IRIG-B, DCF77, or system interface
Compact and cost-effective overcurrent protection
High-performance protection functions
Full data security and lifecycle transparency
User-friendly design and software
High-quality engineering process with greater reliability
Advanced cybersecurity and safety
IEC 61850 Edition 1 & 2 compliant
Universal protection & control device (SIPROTEC 5 system)
Suitable for feeders and lines
Applications include short-circuit detection, ground-fault detection, backup protection for transformers/generators/lines, capacitor bank protection, PMU, load shedding, automation
Supports multiple DIGSI application templates
Functions include: directional/non-directional overcurrent, inrush detection, arc protection, frequency protection, QU protection, CB failure protection, voltage supervision, harmonic detection, pulse ground-fault method, power protection, logic editor, and more
–
Centralized busbar protection with:
20 three-phase current measuring points
4 three-phase voltage measuring points
26 bays (feeders, couplers, bus-section disconnections)
4 bus zones with measurement
4 couplers with 1 or 2 current transformers
2 auxiliary busbars without measurement
Phase-selective measurement and display
Selective tripping of faulty bus zones
Disconnector-independent check zone
Shortest tripping times (<7 ms)
High stability during external faults, including transformer saturation
Freely adjustable operate curve and additional high-sensitivity curves
Fast recognition of internal and external faults (2 ms)
Compatible with closed iron core or linearized CTs
Adaptable CT ratios per parameterization
Three measurement methods for minimum tripping time and max stability
Circuit-breaker failure protection integrated
Extensive CT monitoring, measured value processing, and trip circuit supervision
Optional features: 1/3-pole or 3-pole CB failure protection, end-fault protection, external trip signals, phase/ground overcurrent protection, cross-stabilization, bus coupler differential protection
Integrated DIGSI 5 and modular hardware/software
Engine Brand: VOLVO
Engine Model: TAD732GE
Prime Power (KW): 163 kW
Standby Power (KW): 181 kW
Engine Power (HP): 218 HP
Maximum Engine Power (HP): 243 HP
Engine Displacement: 7.15 L
Number of Cylinders: 6 (Inline)
Aspiration System: Turbocharged
Cooling System: Water-cooled
Governor Type: Electronic
Electrical System: 24V DC
Dry Weight: 710 kg
Torque: 1049 Nm
Alternator Specifications
Alternator Brand: Stamford
Alternator Model: UCI274G
Prime Power (kVA): 186 kVA
Standby Power (kVA): 200 kVA
Frequency: 50 Hz
Output Voltage: 400/230 V
Insulation Class: H
Protection System: IP23
Efficiency: 92%
Power Factor: 0.8
Number of Poles: 4
Number of Bearings: 1
Alternator RPM: 2250 rpm
Coupling Specifications
Prime Power (kVA): 180 kVA
Standby Power (kVA): 200 kVA
Prime Power (KW): 144 kW
Standby Power (KW): 160 kW
Assembly Country: India, Sweden, Germany,
Weight Without Canopy: 1720 kg
Weight With Canopy: 2050 kg
Dimensions Without Canopy (mm): 3000×1860×1300
Dimensions With Canopy (mm): 3750×2200×1300
Technical Specifications
Monitoring Functions:
Self-supervision of relay and R2R communication
Trip circuit supervision (74TC)
Measured-value supervision
Oscillographic fault recording
Event/fault logging
Switching statistics
Front Design:
User-friendly operation interface
PC front port for DIGSI 4 configuration
Function keys and 14 LEDs for local alarm indication
Communication Interfaces:
2 serial R2R protection data interfaces (ring/chain topology)
Front PC interface
System interface for control system connection via:
IEC 61850 Ethernet
IEC 60870-5-103
PROFIBUS-FMS / DP
DNP 3.0
Rear-side service/modem interface
Time synchronization via IRIG-B, DCF77, or system interface
Compact and cost-effective overcurrent protection
High-performance protection functions
Full data security and lifecycle transparency
User-friendly design and software
High-quality engineering process with greater reliability
Advanced cybersecurity and safety
IEC 61850 Edition 1 & 2 compliant
Universal protection & control device (SIPROTEC 5 system)
Suitable for feeders and lines
Applications include short-circuit detection, ground-fault detection, backup protection for transformers/generators/lines, capacitor bank protection, PMU, load shedding, automation
Supports multiple DIGSI application templates
Functions include: directional/non-directional overcurrent, inrush detection, arc protection, frequency protection, QU protection, CB failure protection, voltage supervision, harmonic detection, pulse ground-fault method, power protection, logic editor, and more
–
Centralized busbar protection with:
20 three-phase current measuring points
4 three-phase voltage measuring points
26 bays (feeders, couplers, bus-section disconnections)
4 bus zones with measurement
4 couplers with 1 or 2 current transformers
2 auxiliary busbars without measurement
Phase-selective measurement and display
Selective tripping of faulty bus zones
Disconnector-independent check zone
Shortest tripping times (<7 ms)
High stability during external faults, including transformer saturation
Freely adjustable operate curve and additional high-sensitivity curves
Fast recognition of internal and external faults (2 ms)
Compatible with closed iron core or linearized CTs
Adaptable CT ratios per parameterization
Three measurement methods for minimum tripping time and max stability
Circuit-breaker failure protection integrated
Extensive CT monitoring, measured value processing, and trip circuit supervision
Optional features: 1/3-pole or 3-pole CB failure protection, end-fault protection, external trip signals, phase/ground overcurrent protection, cross-stabilization, bus coupler differential protection
Integrated DIGSI 5 and modular hardware/software
Engine Brand: VOLVO
Engine Model: TAD732GE
Prime Power (KW): 163 kW
Standby Power (KW): 181 kW
Engine Power (HP): 218 HP
Maximum Engine Power (HP): 243 HP
Engine Displacement: 7.15 L
Number of Cylinders: 6 (Inline)
Aspiration System: Turbocharged
Cooling System: Water-cooled
Governor Type: Electronic
Electrical System: 24V DC
Dry Weight: 710 kg
Torque: 1049 Nm
Alternator Specifications
Alternator Brand: Stamford
Alternator Model: UCI274G
Prime Power (kVA): 186 kVA
Standby Power (kVA): 200 kVA
Frequency: 50 Hz
Output Voltage: 400/230 V
Insulation Class: H
Protection System: IP23
Efficiency: 92%
Power Factor: 0.8
Number of Poles: 4
Number of Bearings: 1
Alternator RPM: 2250 rpm
Coupling Specifications
Prime Power (kVA): 180 kVA
Standby Power (kVA): 200 kVA
Prime Power (KW): 144 kW
Standby Power (KW): 160 kW
Assembly Country: India, Sweden, Germany,
Weight Without Canopy: 1720 kg
Weight With Canopy: 2050 kg
Dimensions Without Canopy (mm): 3000×1860×1300
Dimensions With Canopy (mm): 3750×2200×1300
Spécifications techniques
–
–
Protection des alimentations
Large gamme de fonctionnalités de protection et de contrôle, avec capteurs ou transformateurs conventionnels
Configurations standard prêtes à l’emploi pour installation rapide
Module enfichable extractible pour installation et tests rapides
Grand affichage graphique pour diagrammes unifilaires personnalisables, accessible localement ou via HMI web
Services étendus sur le cycle de vie
Protection directionnelle et non-directionnelle contre surintensité et défaut à la terre, mesure de tension, fréquence et puissance
Protection défaut à la terre multi-fréquence pour une sensibilité et sélectivité accrues
Localisation rapide optionnelle des courts-circuits, défauts à la terre, protection arc et sorties haute vitesse
Support IEC 61850 Editions 1 & 2 : HSR, PRP, messages GOOSE, IEC 61850-9-2 LE
IEEE 1588 V2 pour synchronisation temporelle précise
Supporte Modbus, DNP3 et IEC 60870-5-103
–
–
